Why is steam generator leaking water?

Why is steam generator leaking water?
Why water flows from the steam generator – knowing the reasons, you can quickly find ways to solve the problem. The owner of such equipment may encounter such a malfunction. It is better to entrust the solution of the problem to specialists. But if the device is not under warranty, you can fix a simple breakdown yourself. It is important to know how to perform work and follow the simplest safety rules. To understand the cause of the malfunction, you must first understand how the steam generator works.
 

The principle of operation of the device and what is fraught with damage to the steamer

The device works simply. Purified, better distilled water is poured into a separate container. It is distilled water that will not allow the formation of scale on the heating elements and the device of the steam generator. From the tank, with the help of a special valve device, moisture enters the soleplate of the iron and, when heated, turns into steam. The valve regulates the amount and speed of the flow, depending on the set heating temperature of the sole. This is how a working device should work, but a situation often arises when:
  • when heated, hot water is captured along with steam and the steam generator starts to soak things, instead of steaming. In a few minutes, a puddle of water may form, which is dangerous when using electrical appliances;
  • poorly steamed and damp clothes will become wrinkled again, as the wet fabric will wrinkle as it dries. But a more unpleasant consequence may be the unpleasant smell of linen and clothes and the formation of mold;
  • when the water is saturated with salts, droplets of moisture falling on the laundry can leave stains on it. In the best case, you will need to rewash your clothes.
The steam generator began to spit water, you must immediately turn it off from the network and understand the possible cause of the malfunction.

The main causes of water getting into steam

There are several reasons for this; each of them will need to be analyzed in more detail.

Reason #1

This is not a hardware failure, but this item should not be ignored. When buying, many consumers want to purchase more powerful appliances, but it may be the fault of the manufacturers. We note right away – only replacing equipment can solve such a nuisance, in rare cases, buying a new iron with a hose can help.
Important!  The power of the heaters does not affect the quality of the steam and the correct operation of the steam generator. You should not buy industrial equipment for home needs. Large, powerful appliances will require more water to fill in, increase purchase costs and electricity bills. But the most annoying thing is when you stand in a room with high humidity and condensation dripping on your linen.

Reason #2

The steam generator spits – perhaps the cause is a faulty valve. When all the rules for the operation of the equipment are followed and water leaks occur, the reason lies precisely in the locking device. But you need to make sure that this part is faulty. Make it simple. We close the valve, turn on the steam generator in any mode, except for supplying steam to the iron. We take and swing the iron around. When water drops appear, make sure that the valves do not block moisture. The valve needs to be replaced. You will need to contact the service center. For the help of experts.

Reason #3

Errors during operation of the steam generator and its maintenance. The steam generator’s operation control is equipped with a temperature regulator, on which special marks are made indicating the time when the steam supply can be turned on for a steam boost. If the soleplate of the iron has not warmed up to the set value and steam should not be supplied, it is not recommended to try to rush and turn on its flow. Such inattention may be one of the reasons.
Important!  Before ironing, set the type of fabric and the heating level of the soleplate of the iron, put it in a vertical position and wait for the heating indicator of the iron base to turn off. Only after that, press the steam supply button.
Otherwise, water will drip from the openings of the steam generator instead of jets of steam. If the indicator goes out, but water flows, the soleplate heating regulator may have failed. In this case, you will need to visit the service center and replace the part. Performing minor, simple repairs, replacing an inexpensive part, or disassembling an iron with a steam generator are much cheaper than buying a new device. The filler cap in the water tank must be tightly closed until it clicks, otherwise, water will splash out and fall on linen or clothes.

Careless bending of the hose

In this position, even after several minutes of operation of the equipment and turning on the steam supply, if the hose is even slightly pinched or the location of the iron is opposite the steam outlet of their equipment, and the hose itself is much lower, water can come out with steam. This creates a water lock and water cannot flow into the steamer. Thus, the circulation of water in the system is disturbed and steam cannot pass through the plug without capturing a small amount of water. If there is a large amount of moisture in the plug, water may flow back into the niche and the moisture collection container. To get rid of such an unpleasant situation, you can simply place the iron with a hose over the steamer. After 10-15 seconds, the water will drain and the water plug in the hose will break. In case of a large traffic jam, you will have to turn off the steam generator and let it cool down. Then we disconnect the hose from the steam generator by placing the hose over the sink or bucket, raise the iron and drain the water. Eliminate steam water leakage, steam generator may need to be descaled. To do this, you will need to fill in industrial products or folk substances to remove alkaline deposits, then turn on the heating of the water to the maximum temperature. Then the water with scale is drained, pure water is poured and the operation is repeated. To remove alkaline deposits, antiscale is used, simple citric acid, even sprite and cola successfully cope with descaling.

In conclusion, we note

It is easier to prevent emergencies and breakdowns with the help of proper operation of the steam generator and the performance of routine maintenance and simple repairs. Watch the amount and saturation of the steam coming out. It can condensate on clothes in large quantities and leave damp spots after ironing. Prevent dirt, starch, chemicals from entering the fluid tank. These substances can inhibit the formation of steam in the device and arbitrary splashing out of the holes in the soleplate . Washing the liquid receiving compartment and using distilled water and special liquids of industrial production will help to eliminate. If the iron is cold and liquid flows out of it – such a nuisance can happen when the appliance is in a horizontal position or if the water tank is left full after a lot of work. It is very important that after each use, the liquid must be drained, the heating control must be set to 0. During storage, only the vertical position of the steam generator is allowed. By following these simple rules, you extend the trouble-free service life of your clothes and linen steaming equipment.
RELATED POST

Leave a Reply